|
Appendix G |
||
|
Title: SUPPLEMENTAL REQUIREMENTS FOR
GENERAL MATERIAL DDG 51 ARLEIGH BURKE CLASS and DDG
1000 ZUMWALT CLASS |
Rev. R |
Date 10/08/07 |
|
|
APPENDIX G CHANGE
PAGES DESCRIPTION OF
CHANGE REV |
DATE |
|
H SDRL CODE E001 WAS ILR CODE 6 SDRL CODE E011 WAS ILR CODE 8 SDRL CODE LOO1 WAS ILR CODE 7 SDRL CODE L002 WAS ILR CODE 7 SDRL CODE LO04 WAS ILR CODE 7 SDRL CODE L005 WAS ILR CODE 7 SDRL CODE L006 WAS ILR CODE R SDRL CODE LOO8 WAS ILR CODE 9 SDRL CODE LOO9 WAS ILR CODE 5 SDRL CODE L010 WAS ILR CODE 5 SDRL CODE L012 WAS ILR CODE 5 SDRL CODE L013 WAS ILR CODE 5 SDRL CODE L014 WAS ILR CODE 5 SDRL CODE LO15 WAS ILR CODE 5 SDRL CODE L021 WAS ILR CODE 5 SDRL CODE L024 WAS ILR CODE 7 SDRL CODE L025 WAS ILR CODE 7 SDRL CODE QCOD WAS BLR CODE D SDRL CODE QCOF WAS
BLR CODE F SDRL CODE QCOH WAS BLR CODE H SDRL CODE QCOI WAS BLR CODE I SDRL CODE QCOL WAS BLR CODE L SDRL CODE QTOA WAS BLR CODE A or E SDRL CODE QTOB WAS BLR CODE B SDRL CODE QTOC WAS BLR CODE C SDRL CODE QTOG WAS BLR CODE G SDRL CODE T007 WAS ILR CODE 3 SDRL CODE T008 WAS ILR CODE 3 SDRL CODE T009 WAS ILR CODE 3 SDRL CODE T011 WAS ILR CODE 1 SDRL CODE T012 WAS ILR CODE 1 SDRL CODE T013 WAS ILR CODE 1 SDRL CODE T014 WAS ILR CODE 4 SDRL CODE T015 WAS ILR CODE 4 SDRL CODE T031 WAS ILR CODE 2 SDRL CODE T032 WAS ILR CODE 2 SDRL CODE T033 WAS ILR CODE 2 SDRL CODE T034 WAS ILR CODE 4 Deleted BLR Codes J & K Deleted
ILR Codes 0 & T |
9/25/91 |
|
J Page
(6), revised delivery schedule for SDRL’s T013, T033 and T034 Page
(8), revised Statement of Prior
Submission Description adding the option of a COI Page (10), added COI figure and
renumbered all figures starting at figure number 3 and renumbered all pages
starting at page 10. Page (13), revised QCOH and QCOL
descriptions |
1/29/92 |
|
K Page
(6), Delivery schedule for L005 was 6
weeks after P.O., T007 was 36 Weeks Prior to Shipment, T008 was 18 Weeks
Prior to Shipment, T011 was 63 Weeks Prior to Shipment, T012 was 42 Weeks Prior
to Shipment, T014 was 42 Weeks Prior to Shipment, T015 was 20 Weeks Prior to
Shipment, T031 was 63 Weeks Prior to Shipment, and T032 was 42 Weeks Prior,
to Shipment. Page
(7), Page
(13),SDRL Code QCOL, Page
(14),SDRL Codes QTOA, QTOB, QTOC, QTOQ, |
3/6/92 |
|
L (Cont.) Page
(6), Added border to table II in paragraph
3.2., deleted reference to L024 and L025, changed delivery time for L002 from
3 weeks to 6 weeks, and changed delivery time for T008, T012, and T032 from
12 weeks to 16 weeks. Page
(7), Add “i”
to the word acquisition in paragraph 4.l; paragraph 4.2.1 and 4.2.2 changed
revision level of 072-04 and 073-04 from “C” to “D”; and paragraph 4.2.3
changed revision level of 406-01 from “F” to “G”. Paragraph 4.2.12 added “for DDG 51 through
67”. Paragraph 4.2.l4, revised DI-V-704A to DI-V-7004A. Deleted paragraphs
4.2.15 and 4.2.16 in their entirety. Page
(8), Added new paragraphs 4.2.15,
4.2.16, 4.2.17, and 4.2.18. Page
(9), Paragraph "SDRL CODE:
L001... (PTD):” deleted "Technical Data Identification Check List and
Contractor Technical Information coding of Replenishments Parts. Paragraph 3, revised DI-V-704A to
DI-V-7004A and deleted paragraphs 5 and 6. Page
(10),Substituted the word "Seller" for the
word "Supplier". Page
(11),Paragraph 1, for existing manuals deleted “along with an A & PR page
identifying Buyers contract number and hull applicability,”; paragraph 2
added “a TMDP and” to second line and added for DDG 59 through 76... followships.”; paragraph 3,
added “for DDG 59 through 76...followships.”;
paragraph 4 added “or Review Draft Copy (RDC)” and “or Final Reproducible Copy (FRC),”; and paragraph 4.a) added “for DDG
59 through 76... followships.” Replaced Paragraph 4b in its entirety. |
3/14/95 |
|
APPENDIX G CHANGE PAGES DESCRIPTION OF CHANGE REV |
Date |
|
L
(Cont.) Page
(12),Added “or RDC”” to paragraph 4c, added
"for DDG 59 through 76... followships”
to para graph 4c and 4d; and paragraph 4e Added “or
Final Reproducible Copy (FRC)”; and Added "Also, for DDG 77 and Followships,... 3.5.5.1.1.”, and added box around
calibration certificates. Page
(14),In the Grade A and Grade B shock paragraphs
substituted the word "Grade” for "GR”. Page
(15),Corrected “TMTN” to “TMIN”; added words
"(Buyer will Furnish)”; removed the slash mark and substituted the word
"or”; and changed "FSCM” TO “CAGE”. Page
(16),Added "(Seller's Name)”, and substituted
"or” for the slash mark. Page
(17), Added numbers 1) through 9);
deleted paragraph at the top of the page; deleted three slash marks and
substituted the word "and”; substituted “Manuscript or RDC” for
"Manuscript”; added “Technical Manual Validation Start”; deleted “Notes:
validation required prior to next submittal”;.deleted
“(For new technical manuals only” substituted “CRC or FRC” for “Camera
Ready”; and substituted “preliminary” for “previous”. Page
(18), Added new page and figure 6 which
was missing from Appendix G. |
3/14/95 |
|
M Page
(5), Revised the word "Supplier”
to "Seller". Page
(7), Changed address for obtaining
government documents and changed revision levels of Specifications 072-04, 073-04, and
406-01. Page
(8), Added paragraph "d” under
SDRL CODE E00l.
Page (10),Revised COI form to add
"Manufacturer Name” Manufacturer P/N, and Eng. Dwgs.” |
9/29/95 |
|
|
|
|
N Cover page:
Date was 29 September 1995. Page (1), Page (2), added SDRL CODES QCOV and QIOT. Page (3), Figure (1), Replaced P.O. form
with revised form. Page (4), in address, deleted D14 and added
M/S 3220. Page (5), added SDRL CODES QCOV and QIOT. Page (6), Page (7), Added para.
4.2.19. Page (8), SDRL Codes E001 and E011, deleted
reference to base level. SDRL Code E001, para.
d, deleted reference to Figure (3). SDRL Code E011, MIL-STD-278F was
MIL-STD-278. Page (9),SDRL
Codes L001, L002, L004 and L005, first para. added EDFP for DDG 85 and Followships. |
11/16/99 |
|
Page (10), Added PMG for DDG 85 and Followships and added reference to the LMI Worksheet and
added op- tional submittal using ICAPS. SDRL Code L008, deleted reference to base
level. SDRL Code L012, added TMCR’s
for DDG 83 and Followships. SDRL Code L009, deleted reference to item
level. Page (11), SDRL Code L021, deleted reference
to base level, added TMCR’s for DDG 83 and Followships. SDRL Code L010, added TMCR’s
for DDG 83 and Followships. Page (11) and (12)SDRL
Code L013, L014, Validation Certificate and L015, added TMCR’s
for DDG 83 and Followships. Page (12), Validation certificate, quantity
was 20. SDRL Code QCOD, deleted reference to item
level. Page (13) and (14), SDRL Codes QCOF, QCOH,
QCOI and QCOL deleted reference to item level. Page (15), added SDRL Codes QCOV and QIOT. Page (16), SDRL Codes T007, T008, T009,
T011, T012, T013, T014, T015, T031, T032, T033 and T034, deleted reference to
item level. Page (21), added Figure (7)
After page (24), added COI form replacing Figure (3). |
11/16/99 |
|
P
Cover Page, add DDG 51 and DDG 1000 Class.
Page (2), added E012, L022, T016, T017, T018, T019, T020
& T021 to Table I
Page (4), change address of VFI ( Page
(5), added E012, L022, T016, T017, T018, T019 T020
& T021 to Table II
Note: Between pages 6-14, one full page was added, as a
result all following pages were renumbered.
Page (6), added paragraphs 4.2.3.1 and 4.2.5.1 Page (7), added paragraph 4.2.20
Page (8), added description for SDRL code E012
Page (10), modified description for SDRL code L008
Page (13), added description for SDRL code L022
Page (14), changed QCOD requirements from MIL-STD to ANSI Z540 specification
Page (15), modified description for SDRL code QCOF
Page (16), modified description title for QTOA, QTOB,
QTOC and QTOG
Page (17), added description for T016 through T021
Added BIW Specification 086-01- Technical Publications
and Technical Repair Standards (TRS) for DDG-1000
Added BIW Specification 406-02-Electromagnetic Environ
mental Effects (E3) Requirements for DDG-1000 |
4/28/06 |
|
Q
Page (2), added C031 SDRL to Table I. Page (5), added C031 “With Shipment” to
Table II |
5/10/07 |
|
R Revised
entire Appendix G document for HTML (Web) format.
Developed Home page (Table of Contents) with links.
Added to Cover Sheet (Home Page) SELLER Introduction/Requirements for NIIIP-SPARS
Added New documents: 072-05, 073-05, PPD 802—7651312
All for DDG 1000 Shock & Vibration requirements |
10/08/07 |
|
|
|