|
Appendix G |
||
|
Title: SUPPLEMENTAL REQUIREMENTS FOR
GENERAL MATERIAL DDG 51 ARLEIGH BURKE CLASS and DDG
1000 ZUMWALT CLASS |
Rev. R |
Date 9/18/07 |
|
|
|
|
||
|
SDRL CODE: QCOV, VOLATILE ORGANIC COMPOUNDS: a. The content of VOC shall not exceed the amount in g/l coating
(minus water and exempt compounds) in Table 2 in Subpart II of 40 CFR Part
63. b. The Seller shall certify the not-to-exceed, VOC content in g/l coating
(minus water and exempt compounds) of each batch supplied to BIW, based on
correlating batch formulation data with Method-24 (of appendix A to CFR part
60) test results. c. The certification statement shall read as
follows: “The as supplied
VOC content is certified not-to-exceed (insert value) g/l coating (minus
water and exempt compounds).” d. This certification statement shall be
contained on either the packing slip or a certification sheet attached to the
packing slip. e. In addition to the above certification, the
Seller shall notify the Buyer of any formulation changes to the VOC content
or solids content of the coating. The Seller shall request a "VOC Data
Sheet for Thinning Determination" from the Buyer. The new coating
characteristics must be entered on the data sheet and submitted to the Buyer
within 30 days of the changes, but before receipt of the QCOV certification
required above. |
|||