|
Appendix G |
||
|
Title: SUPPLEMENTAL REQUIREMENTS FOR
GENERAL MATERIAL DDG 51 ARLEIGH BURKE CLASS and DDG
1000 ZUMWALT CLASS |
Rev. S |
Date 3/20/08 |
|
|
|
|
||
|
SDRL CODE: QCOD, CALIBRATION CERTIFICATE: a. The Seller shall accomplish the requirement
of ANSI Z540-1-1994, Calibration Laboratories and Measuring and Test Equipment-General
Requirements. b. Two legible copies of the Certificate of
Calibration, Figure 4, shall be provided with each packing list. Certificate shall be completed and signed
by a responsible representative of the Seller. c. Two legible copies of the Calibration Data
Sheets shall also be provided by Seller with each packing list to indicate
functions tested, nominal and measured values, and
calibration tolerances. -------------------------------------------------------------------------------------------------------------------- CALIBRATION
CERTIFICATE Printable
.pdf Version I
hereby certify that the instrument(s) listed below have been examined, tested
and found to be within the manufacturer’s published specification when
compared with standard instruments. Calibration
of all standard instruments used on performance of the above tests is
traceable to the
National Bureau of Standards. The standards
and instruments used in the calibration are supported by a calibration system
that meets or exceeds the requirements of ANSI Z540-1-1994. Signed Title Company Mfr: Item Part # Purchase Order # Item Serial # Line Item Calibration Data BIW Catalog # Calibration Due Data Item Nomen. National Bureau
of Standards Test No. Figure (4)
Calibration
Certificate Figure (4) |
|||