Bath Iron Works

                        

A GENERAL DYNAMICS COMPANY

                         Appendix G

Title:

SUPPLEMENTAL REQUIREMENTS FOR GENERAL MATERIAL

 

DDG 51 ARLEIGH BURKE CLASS and DDG 1000 ZUMWALT CLASS

 

Rev.

S

Date

3/20/08

 

APPENDIX G HOME

 

                          REVISION HISTORY

 

SDRL CODE: QTOA, CHEMICAL TEST REPORTS; QT0B, PHYSICAL TEST REPORTS; QTOC, COMPRESSION TEST RESULTS;

QT0G, NON-DESTRUCTIVE TEST REPORT:

 

a.    Test Reports of Certificates of Conformance are required to confirm the compliance of material with specification requirements.  Reports shall reflect actual test results and not merely that the minimum requirements of the specification have been met.  Reports or certificates for any tests described by the procurement specification (MIL-SPEC, ASTM SPEC, ANSI SPEC, etc.) which fall into the categories described by SDRL Codes QTOA, QTOB, QTOC OR QTOG shall be provided when those codes are indicated on the purchase order.  Two (2) legible copies of each completed test report or certificate shall be provided with or in advance of, each shipping invoice.

b.   Each Test Report shall be typed on the Seller’s form.

c.   Each Test Report shall cover all tests performed, the results of each test and any corrective action required to comply with each specification requirement.

d.   Each Test Report shall include:

 

(1)  Reference to Buyer’s purchase order and line item

 

(2)  Material nomenclature and Buyer’s Catalog Number

 

(3)  Heat numbers, where applicable.