Bath Iron Works

                         

A GENERAL DYNAMICS COMPANY

                         Appendix G

Title:

SUPPLEMENTAL REQUIREMENTS FOR GENERAL MATERIAL

 

DDG 51 ARLEIGH BURKE CLASS and DDG 1000 ZUMWALT CLASS

 

Rev.

S

Date

03/20/08

 

APPENDIX G HOME

 

REVISION HISTORY

 

                                                         

REFERENCED DOCUMENTS:

 

Availability.  When requesting specifications, standards, drawings and publications, refer to both title and number.  Copies of Government specifications required by the Seller in connection with specific procurement functions may be obtained upon application to the Standardization Documents Order Desk, Bldg. 4D, 700 Robbins Avenue, Philadelphia, PA 19111-509.  The acquisition of Government and industry specifications, standards, drawings, bulletins, and other publications listed shall be the responsibility of the Seller.  Copies of all referenced Buyer’s documents required by the Seller in connection with this procurement are available upon request to the Buyer’s authorized procurement representative.

 

Documents.  The following documents contain additional detailed requirements as indicated in the descriptions of

SDRL Codes.

 

1.  For DDG-51 Arleigh Burke Class

                 Specification 072-04, Rev. G, High Impact Shock Test Requirements for Lightweight and Medium Weight

                 Equipment,  General Material For DDG-51 Arleigh Burke Class  

                     (SDRL Codes T011, T012, T013),         (SDRL Codes T031, T032, & T033).

2.  For DDG1000 Zumwalt Class

          Specification 072-05, Rev. -, High Impact Shock Qualification Requirements for General Material Equipment For

          DDG1000 Zumwalt Class

          (SDRL Codes T011, T012, T013),         (SDRL Codes T031, T032, & T033).

3.       PPD 802-7651312, 3 April 2006,  SHOCK (HIGH-IMPACT AND LOW-IMPACT) TESTING, DD(X) SHIPBOARD MACHINERY, EQUIPMENT, AND SYSTEMS, REQUIREMENTS FOR DDG1000 ZUMWALT CLASS

4.  For DDG-51 Arleigh Burke Class

      Specification 073-04, Rev. G, Vibration (TYPE I) Qualification Requirements For General Material DDG-51 Arleigh

      Burke Class  (SDRL Codes T007, T008, & T009).

5.  For DDG1000 Zumwalt Class

       Specification 073-05 Rev. -, Vibration  (TYPE I) Qualification Requirements For General Material DDG1000

       Zumwalt Class  (SDRL Codes T007, T008, & T009).

6.  For DDG-51 Arleigh Burke Class

            Specification 406-01, Rev. J, Electromagnetic Interference (EMI) Qualification Requirements, For DDG-51 Arleigh

            Burke Class   (SDRL Codes T014, T015, & T034).

7.  For DDG1000 Zumwalt Class

                     Specification 406-02, Rev. A, Electromagnetic Environ-mental Effects (E3) Requirements, For DDG1000 Zumwalt

                     Class           (SDRL Codes T016, T017, T018, T019, T020 & T021).

8.       American Bureau of Shipping Naval Vessel Rules (NVR), ABS Guide for Building and Classing Naval Vessels, dtd. 15 July

                      2004.     (SDRL Code QCOF)

  9.   MIL-STD-248, Rev. C with Notice 1, Welding and Brazing Procedure and Performance qualification.  (SDRL Code E011).

10.   59074-AR-GIB-010/278, Dated August 1995 Requirements for Fabrication Welding and Inspection, and Casting Inspection

     and Repair for Machinery, Piping and Pressure Vessels (SDRL Code E012).

11.  MIL-STD-278, Rev. F, Fabrication Welding and Inspection, and Casting Inspection and Repair for Machinery, Piping and

                      Pressure Vessels in ships of the United States Navy.   (SDRL Code E011).

12.  S9074-AQ-101/248, Dated August 1995 Requirements for Welding and Brazing Procedure and Qualification Test Data.     (SDRL Code E012).

13.    ANSI Z540-1-1994 Calibration Laboratories and Measuring and Test Equipment-General Requirements.        

         (SDRL Code QCOD).

 

14.        NAVSEA TL490-AG-GTP-010, NAVSEA Provisioning Requirements Technical Specification (PRTS) for Shipbuilding and

        Conversion Contracts for DDG 51 through 67          (SDRL Code L001, L002, & L005).

15.  DID DI-V-7006, Interim Support Items List. (SDRL Code L004).

 

16.  DID DI-V-7004A, Long Lead Time Item List. (SDRL Code L004).

 

17.  Technical Manual Contract Requirement (TMCR)

                    No. NDMS-940021-000 for DDG 77 and 81.

                    No. NDMS-960087-000 for DDG 83 through 87

                    No. NDMS 970157-000 for DDG 90 and Follow ships.

                    (permanent change pages SDRL Code L012)

18.  Technical Manual Contract Requirement (TMCR)

                    No. NDMS-940014-000 for DDG 77 and 81

                    No. NDMS-960080-000 for DDG 83 through 87

                    No. NDMS-970151-000 for DDG 90 and Follow ships.

                    (commercial off-the-shelf technical manuals and supplementary data, SDRL Code L021)

19.   Technical Manual Contract Requirement (TMCR)

                    No. NDMS-940015-000, for DDG 77 and 81

                    No. NDMS-960081-000 for DDG 83 through 87

                    No. NDMS-970152-000 for DDG 90 and Followships

                    (Hull, Mechanical & Electrical (HM&E) Equipment Technical Manuals, SDRL Codes L010, L013, L014, & L015).

20.    NAVSEA Statement of Work (SOW) for Provisioning Technical Documen-tation (PTD) Requirements for Contractor

      Furnished Systems and Equipment in Shipbuilding and Conversion Contracts dated June 1990 for DDG 68 through 84.

                 (SDRL Code L001, L002, & L005).

21.   NAVSEA Technical Specification 9090-1500, Policies and Procedures, Provisioning, Allowance and Fitting Out Support

      Manual, Chap-ter 4 (Change C), Program  Manager’s Guide (PMG) dated August 1999 for DDG 85 and Follow ships.

      Available at Http://www.n.fmso. navy.mil/TechLog/PAFOS/PAFOS0.htm and MIL-PRF 49506,   Logistic Management

      Information (LMI).  (SDRL Code L001, L002, & L005).           

22.  Specification 086-01, Rev. B, Technical Publications and Technical Repair Standards (TRS) (SDRL Code L022).